The Evil Ornament Challenge Part 2

If you read Kelly's last post you'll know a little about the title of this post.  I bought about six of these 4 packs of glass ornaments after Christmas from the clearance bin a couple years ago. Yep I said years. They were a deal too good to pass up being only .99 for a four pack theater was originally 3.99. They have been taking up valuable storage space in the craft room ever since. As Kelly mentioned I recently moved the craft room to the first floor of our house(reveal post coming soon) and decided to purge them in the best way I know how....a Crafty Challenge!  The only rule was that you have to make 4 different ornaments, medium was up to the crafter.

I'm all about glitter this year so I knew it would play a part of at least a couple of my ornaments.  Here is instructions on how to apply the glitter to the inside of the ornament.  Other than that I winged it the whole way.  Here's what I came up with.

In true Anita's-fashion I couldn't just stop at the assigned 4 ornaments. There were two additional rogue ornaments in the storage bin so I decided to do something with them as well.  So here's the run down of what I did with each one.

I took inspiration from a Santa ornament somewhere on the net for this one. Inside was coated in fine red glitter and suit elements were made from ribbon.  A classic look.

This was the easiest of all six. I coated the inside with blue glitter and stuck on rhinestone paw print stickers to all four sides. That's it!

In contrast this was the ornament that took the longest. I sifted through my button jar and found enough festive red buttons to plaster the exterior of my if my blanks.  This was a little like putting together a jig saw puzzle.  After all the buttons were hot glued in place I filled it with fake snow to make it look so much nicer.

Then there's the polka dot glitter ornament. For the remaining ornaments I painted the outside with glass specific paint, baked them according to the bottle instructions and then filled the interior,  I felt it needed a little something extra so then came the bow.  This one may become a gift.

The snowmen were pretty easy aside from using a super tiny brush to paint their features.  The hubby even picked out the glitter color from my stash because I couldn't decide.  GREAT CHOICE!

And then there is my favorite.  I painted on this woodland cabin scene and then coated the inside with a dark blue glitter.  Its like a twinkly star christmas night.  Really proud of this one.

Sadie liked them all so much that she tried to decorated herself instead of the tree with them.
Nice try, adorable old dog.

Craft on!
Anita

Swap-tastic Christmas

So I know I mentioned my new obsession with crafting swaps in an earlier entry so it shouldn't come as any surprise that I joined another one just for the holiday season.  This one was called the Stocking Stuffer Swap, hosted by Kathie at Two Frog Home, and I have to say I had a great time making my stuffers.  There were no requirements except that everything had to be handmade and pretty small in size so as to fit multiple things into aforementioned stockings.  It was pretty cool how she divided the names too.  Instead of just making one big thing for one person you made one little thing for everybody.  Plus that way you get way more goodies in your own mailbox.

I've been looking for an excuse to try out this bird ornament tutorial for a while.  Of course I put my own little twist by adding some tail plumage (aka 1 craft feather) to my bird that wasn't originally called for.  They came out awesome and I cant wait to make one for my own tree.  Wouldn't it be cool to make all different colors?
So the other thing that went into my packets were gift tags that I made on my current favorite thing....my Cricut Machine!  I never thought I could justify buying one cuz they are so pricey but good old Joanne Fabric had them on sale on black Friday for $59.99  That's like 75% off!  So I was trying to figure out what would be my new project with this amazing machine and then I found out it can make gift tags.  Really the question is what can't this machine make.  Believe me you will be seeing a lot more fancy things as I get the handle of using it.  This was what went into my little packets.

So now all that's left to do is wait for the last of my packets to arrive in the mail.  A good number of the girls in the swap sent their stuff way earlier so I've already received some great stuff.  Once I get everything I'll do another post just to show you the variety of stuff I got.  So far everything is awesome!

Craft on!
Anita

Beaded Bone Ornament Tutorial

I made this little ornament on a whim in a late night crafting session and I totally love it.   

Stuff you need:

Bone template (you may have to resize this so it matches the 2" scale)

White felt - enough for 5 cutouts of the pattern

Jewelry thread (I use 6lb Fireline) 

Beading needle

Embroidery needle (make sure its small enough to go through the hole in the rectangular beads)

Beads- White/clear rectangular beads (R) - 50

            Clear seed beads (CS) - 200

            Green seed beads (GS) - 225

Glue gun w/ glue

1.  Using the bone template cut out 5 bones out of the white felt.

2.  Glue three of the bones together in a stack.  CAUTION!  Hot glue only along the spine of the bone, aka the black line in the picture below.  You don’t want glue on the edges where you will be sewing on the beads or it will make this project a lot harder and you more prone to finger needle gouges. 

3.  Take about 2.5 yards of your thread and knot the end.  *TIP*  You want a pretty big knot or it will go straight through the loose weave of your felt.  Double over the end a few inches and knot the whole thing twice to make a nice hefty knot.

4.  Run your needle from the inside of your bone stack through two layers and pull your thread through until your knot gets nicely stuck.  Trim off the excess thread.

5.  Next you will sew your rectangular beads onto the edge of the bone stack.  Follow the side view illustrations below to secure them.  Don’t worry about making your stitches perfect cuz we will cover them up later.  Remember not to pull the thread too tight for the first couple beads so as to not pull your knot through the felt.  If its a little loose you can always reinforce when you come back around.

*TIP*  Angle your needle when doing the second pass for each bead.  This will help with keeping your stitches on either side of the bead, making them more stable.

Follow the pattern to keep attaching beads all the way around.  Dont worry about making it perfect cuz we will be covering your stitches later.

This is what your bone will look like when you have all the rectangular ones attached.  Knot off your thread however you like and cut the excess.

6.  You’re done with the embroidery needle now and need to switch over to the beading needle.  Thread your needle through the first rectangular bead, add three clear seed beads and run the needle through the next rectangular bead.  Add three more clear seed beads.

7.  Tie a knot with the two ends of the thread.  This will make a loop with the beads you’ve added.  Trim the excess tail.  

8.  Run your thread back through the same loop you just made but stop at the 4th seed bead.  

9.   Add 2 CS beads and run through the next R bead to the left.  Add 2 more CS beads.

10.  Now you are going to go back through a bunch of beads already on your bone in order to make a loop.  Its easier to show you the steps than describe them so just follow the illustrations below. 

11.  Repeat this step until you get all the way around the bone to the last loop.  When you get to the picture below you are on the last loop.

This time you only have to add 1 CS bead on each side to complete the loop.  Go back through your last loop one more time to reinforce it and knot off the thread.  Just make sure you end back up in the middle of the bone cuz this is where we will attach your beaded chain.

*OPTION*  If you dont want to go through making a beaded chain to hang your new ornament clip off the thread excess here.  You will have to add a piece of ribbon to have something to hang the bone with instead. (This looks really cute too.)  Skip to step 20.

12.  Now we are going to make the beaded chain.  Take 1.5 yards of your beading thread with beading needle attached and string 10 GS beads.  Go back through all 10 starting from the begining. (We are going to make this into a loop.)

13.  Pull the two ends of your thread, leaving about a small tail, until they pull the beads together making a loop.   

Tie the two ends into a knot.  Snip off the tail and go back through the loop you already made to reinforce it. 

14.  Add 9 GS beads and thread your needle back through the last bead in your previous loop.

15.  As you pull the thread tighter you will see a loop start to form.  Run your needle through the first 5 GS beads in the new loop as below.

16.  Continue adding new loops until you have a long enough chain to hand your bone on the tree.  When you have the desired length just reinforce the last loop, tie off your thread, and snip the tail.

17.  Go back to your bone with the thread still attached.  You are going to use it to attach the chain.  Run your beading needle through the 3 GS beads on the bottom of one of the ends of your chain.

18.  Run your needle back through the same line of beads on the bone where you started.  Pull tight.

Go back through this loop at least once more.

19.  Repeat steps 17 and 18 to attach the other end of your chain.  Be careful to not twist the strand when you attach it.  Reinforce your loop and tie off the thread.  Trim excess tail.

20.  You're almost there!  The only thing left to do is attach the other two felt bones you made to either side.  This will cover up your stitches.  Use your glue gun to attach them and this time I encourage you to add glue to the edges too.  

Voila!  One awesome custom hand made bone ornament your four legged friend will love.  

Craft on!

Anita